Used Equipment Pasadena

Used Forklifts

Used Forklifts Pasadena - Forklift operators are employed in warehouses and factories to transport supplies from one place to another. Forklift operators require particular training, that is normally offered by the workplace. Prospective forklift operators should be able to pass both a background check and a drug test. A forklift operator's responsibilities include carrying out daily safety and functionality inspections. The Occupational Safety and Health Administration mandates that all forklifts be inspected prior to use. The operator should check the forklift once more after the shift. Annual safety training is really an essential part of the job description of a forklift driver. To unload and load materials and to stack stuff in a timely and efficient manner, forklift drivers use the controls on the forklift. A forklift operator's responsibilities consist of weighing the supplies they are moving, and logging the weights. One more vital part of a forklift driver's task is quality control. This includes making certain that orders are correct and making certain the materials do not sustain damage during the moving process. Caring for the forklift battery helps guarantee a long life span for the unit. Proper maintenance and care comprise checking the level of water within the battery roughly every five charge cycles, being careful not to overflow the water while filling the cell to just above the visible protector, and cleaning up any spills. Once a battery is charging, never interrupt the cycle. When performing works on the forklift battery, like checking the level of water, Personal Protective Equipment or PPE is essential. Both eye protection and hand protection should be worn, and an acid spill kit and a fire extinguisher must be on hand. Forklift operators should always observe safety regulations. The charging place must be kept clear of open fire and ventilated. Telescopic handlers are a bit like forklifts. It possesses a single telescopic boom which extends upwards and forwards from the truck, and a counterweight within the rear. It functions more like a crane than a forklift. The boom could be outfitted with various kinds of attachments. The most common attachment is pallet forks, but the operator could also attach a lift table, bucket or muck grab. Also called a telehandler, this particular type of equipment is commonly used in industry and agriculture. A telehandler is often used to move loads to and from places that would be hard for a conventional forklift to access. Telehandlers are commonly utilized to unload pallets from inside a trailer. They are also more practical compared to a crane for carrying loads onto rooftops and other high places. There is just one major limitation in utilizing telehandlers. Despite rear counterweights, the weight-bearing boom can cause the vehicle to destabilize while it extends. Thus, the lifting capacity lessens as the distance between the front of the wheels and the centre of the load increases. The Matbro company developed telehandlers within England. Their design was based on articulated cross country forklifts utilized in forestry. First models consisted of a driver's cab on the rear section and a centrally mounted boom on the front, but these days the most common design has a rigid chassis with a rear mounted boom and side cab. Since 1986, Caterpillar has transformed into a household name in the manufacturing of construction and mining equipment, industrial gas turbines, diesel-electric locomotives, diesel engines and natural gas engines. Caterpillar has several products which are sold under various brand names including: CAT, Caterpillar, MAK, EMD, MWM, Solar Turbines, SEM, Progress Rail, Perkins and FG Wilson. Caterpillar concentrates on numerous industries including Construction, Energy & Transportation, Resource Industries and financial products, together with a variety of operating segments. A vast dealership network spanning 190 countries all across the world organizes the majority of the fleet. All Toyota machinery and parts built within North America adhere to the International Organization for Standardization or ISO 14001 standard. The Columbus TIEM plant has been honored on many occasions for its commitment to continuous development and its environmentally friendly systems. It is the first and only maker to offer EPA and CARB-certified Compressed Natural Gas powered lift trucks on the market. To illustrate, the Toyota 8-Series IC lift vehicles emit 70 percent fewer smog forming emissions than the existing centralized EPA standards and have complied with California’s strict emission standards and regulations. Jungheinrich is presently among the leading suppliers of material flow technology, warehouse technology and lift trucks all around the globe. They are Number 1 in Europe for system technology. The business provides a comprehensive product range of rack systems and material handling equipment together with services from a manufacturing logistics service provider. Among the forklift truck suppliers, Jungheinrich is the 3rd largest supplier. This growth is significantly due to their technological innovations and quality lift truck designs. They have developed a host of ergonomic and productivity enhancements for their fleet and introduced a proprietary 3-phase AC motor and controller technology. Jungheinrich has more than 300 dealer and service facilities strategically located throughout Canada, the USA and Mexico. The company is proud to simplify your material handling requirements by offering customized solutions. Jungheinrich offers an extensive line of forklifts that perform remarkably in a variety of applications. These equipment are well-suited to carry out tasks in a diverse setting. They can complete order picking, food processing, warehousing and stacking applications with ease.

Caterpillar: Used Caterpillar Counterbalance Forklifts Pasadena - Forklift Manufacturers Virtually 100 different brands of forklift are made by companies throughout the world. The industry is dominated by companies like for instance Clark and Caterpillar. Within Asia, manufacturers like Nissan and Toyota are key players. Selecting a forklift company for your forklift purchase means choosing the one that is best for you. Two of the best five forklift companies are situated in the United States, while the other three are in Germany and Japan. Toyota & Raymond, is a Japanese company which manufactures both internal combustion and electric powered forklifts. The top German company is Kion Group, recognized for its low cost, high performance, hybrid forklifts. Hybrid technology is a recent development that presents a solution to the pollution caused by fuel-burning engines. Jungheinrich Lift Truck Corp. is another respectable manufacturer providing different lift machinery. An Ohio-based company, Crown Equipment Corp., is ranked fourth. Crown Equipment is recognized for the efficiency and quality of its products. The state of Ohio is also the home of NACCO Industries, fifth on the list. NACCO Industries has diversified to include household products in addition to forklifts.

Potain: Used Potain Construction Cranes Pasadena - Potain is a global leader in the industry of construction cranes. This is a particular brand which belongs to Manitowoc. They specify in providing cranes for the building construction industry. Several of the varieties and service news about Potain cranes include: crane operators training courses, tower cranes, crane equipment innovations, building site reference and second-hand cranes, among many other things. Within today's global marketplace, there are a lot of different realities. Today's customers no longer accept the "one-size-fits-all-solutions" for their work applications. Manitowoc is dedicated to helping all their customers suit their really specific and varied needs. The company is completely structured to be able to meet the diverse requirements for different tasks and regions in order to serve their broad customer base. Potain produces a wide variety of machines such as: Manitowoc-lattice boom crawler cranes, Grove mobile hydraulic cranes, National Crane telescoping cranes and Potain tower cranes are services, sold and built at numerous locations on 5 different continents. In order to maximize functionality and value, practically all Manitowoc products are designed and built as modular base models that have the capacity of for add-on parts that can be added on in order to maximize their performance. Lastly, each and every product has been engineered with features which meet all the needs of a variety of regions. For example, they offer simplicity, along with reliable and efficient performance in the toughest environments as well as suit all the requirements of transportation regulations all over the world. In order to help their clients facilitate obtaining the right type of machine, Manitowoc Finance offers many inexpensive financing options for their clients in order to be able to tackle profitable new opportunities as they arise. Additionally, as soon as their clients are in the field, Manitowoc's Crane Care offers comprehensive service packages. They are available to help and have expert repair and diagnosis available at your side. All maintenance is performed by qualified local representatives who speak the native language of where help is being called from. These professionals have the knowledge and ability to return your machinery to lucrative operation with a short amount of downtime.

Kalmar: Used Kalmar Outdoor Forklift Pasadena - The intermodal handling equipment engineered and designed by Cargotec is commonly utilized all over the world. By definition, an intermodal terminal is a link between seaport and railway or between railway and road. Cargotech provides innovative solutions, whether there is a need for machine to handle swap bodies, containers or trailers. Amongst the most common equipments utilized in intermodal operations are reach stackers. This is because of their extreme speed and overall flexibility. Two or one rail track are capable of being accessed from the side. Also, lift trucks that have extended gantry spreaders could be used for accessing the first rail. RTG cranes are usually the best alternative for handling trailers or containers on railcars. Roughly up to 4 rail tracks could be simultaneously covered. In addition, containers could be stored at the side of the rail tracks. If lots of railcars are handled systematically, RTG cranes are most effective. Commonly used in large rail operations, RMG cranes are chosen because several tracks are able to be covered simultaneously. Road traffic has the option of being separated easily with cantilevered RMG cranes for more efficiency. Straddle carriers can be used on railcars in handling containers. In order for this operation to be a success, an on-dock rail yard must be located within a short distance to the main container yard so that things could remain economical. Reach stackers are among the best and most flexible solutions for handling containers on small and medium sized ports and for multi-purpose terminals. Reach stacker technology which provides superb performance advantages whilst lessening overall lifecycle expenses is the most excellent kind of investment. The Cargotec Kalmar DRF units are among the best reach stackers ever made. They are known for their remarkable performance known in the business. They have a computer control system which lessens fuel consumption and helps prevent engine and gearbox damage. These units offer smooth automatic gear shift and driver controls, as well as low emission levels. They are available in a variety of options and various models. Combinations comprise combi-lift and top-lift configurations.

JLG: Used JLG Boom Lifts Pasadena - The boom lifts made by JLG could get you into position efficiently, safely and quickly for maximum production. Excellent performance, versatile reach, easy maintenance and high capacity are provided on each of these equipment. JLG offers combustion-powered booms that are made to successfully get the work done. These models are designed with details in mind. They allow you to perform routine maintenance and are comfortable and ergonomically correct for the user. Unleash Machinery which Drive Your Performance Higher Throughout the day at a jobsite, productivity is the overall measurement. Thus, you require equipment that are dependable to guarantee the output of your group in order to meet the challenges of the environment you are working in. JLG takes care of necessary details so that your operators can be as efficient as possible throughout the day. JLG has a full array of engine powered boom lifts that are capable of taking you further and higher than before. Scissor lifts have been engineered to handle more supplies and more workers in a single lift. Regardless of whether you are treading off slab or on, JLG boom and scissor lifts offer remarkable performance and exceptional durability. Like for instance, the boom lifts feature dual-rated capacities and reach heights, along with larger work envelopes which will allow you to rise to the challenge successfully. JLG offers engine powered scissor lifts which offer superior terrainability and gradeability. Additionally, JLG RT boom lifts and scissor lifts can accommodate both the exclusive Workstation in the Sky accessories and workers as well. Take these models for a test drive and watch your productivity catapult upwards. Narrow Design Along with Easy Mobility The 260MRT compact scissor lift provides standard 4-wheel drive, 35% gradeability and rugged lug tread tires. These features will enable you to keep moving both off and on slab. The scissor lift offers excellent mobility due mostly to the 69 inch or 1.75 meter chassis which enables you to get into those difficult and tight spots. There is a huge work platform that provides everything in an arm's reach, with a 4 foot roll-out deck extension. The simplified ground control wiring and built-in diagnostics are meant to help guarantee exceptional serviceability. Boom lifts by JLG have become common sights on construction sites and industrial worksites all around the globe. These equipment help to improve overall jobsite efficiency and complete much work each day.

Snorkel: Used Snorkel Aerial Work Platforms Pasadena - Snorkel is among the top global manufacturers of aerial work platforms. The company provides a complete array of aerial lifts so that they can provide safe and efficient industrial lifting machines that range for approximately 12 to 125 feet. We have the correct machine available for any application. For example, there are models which could deal with the roughest construction job sites or interior building maintenance applications. Snorkel could trace their roots back to the State of California and the year 1946. The company has a proud heritage of finding practical solutions to safely working up in the air. They have established their huge success by continuing to stay true to their core values which influence all of the company's decisions. Snorkel prides itself in maintaining complete focus on their customers. They invented the first self-propelled scissor lift on the market more than 30 years ago. To this day, their strong innovative spirit continues and reflects in their principles and ability to continually search for solutions. The company is always finding various ways to improve safety and productivity and efficiency with working at height. The company has a philosophy to "keep it simple" by making reliable and robust machines which allow you to work in any environment while being in the safest and most efficient manner. Snorkel has designed and manufactured aerial lifts which suit your expectations and needs. These lifts are simple to repair and maintain and overall, they are easy to utilize. These savings translate to less total ownership expenses. There is a type of machine available that is suitable for any kind of use and each type of environment. The Snorkel team works really hard to appease their clients and has a large network of distributors and sales people. The Snorkel team can provide professional opinion and quick response to your queries. They can expedite spare parts and are available for product support. These solutions provided by the company, together with the access to spare parts equals less downtime.

TCM: Used TCM LP Forklifts Pasadena - Propane Tank Regulations The LP or liquid petroleum system style gas container is an OSHA term which refers to the piping, regulators, hoses, regulators, fittings and valves. The agency requires specific parts depending upon the tank's capacity. These individual parts must undergo recognized laboratory testing. The correct laboratory approval proves that the system components meet construction, pressure and thickness standards. Tank Location The OSHA is the organization which dictates how near the propane tank is situated to buildings, to ignitable materials, to tanks containing inflammable liquids, welders and cutting torches. These strict regulations are implemented to make the jobsite as safe as possible for the workers and other people who are in the vicinity. Nameplate Marks LP systems require that the name, the address, the container supplier, and or the tanks brand name, be marked on the propane container. The capacity of the container is to be listed with the following information: gallons or pounds of fuel, square foot outside surface, pressure and fill level. Additionally, information regarding whether or not the container is designed to be installed above ground or underground is also visible. These markings should be on a metal plate connected somewhere noticeable to the container. OSHA requires that every tank should be marked by the Pressure Vessel Inspectors and National Board of Boiler so as to be considered ready and safe to use. Tank Modifications and Repairs Any kind of maintenance to LP systems which require welding are regulated by OSHA. Repair personnel and tank owners need to know the regulatory codes and standards which the tanks were made. Welding repairs to any part of the system which is subject to internal pressure should first comply with these fabrication codes. Any other kind of welding is just permitted on lugs, brackets or saddle plates. OSHA has worked hard to make sure that individuals working with lift trucks and individuals working in the vicinity of lift trucks are kept as safe as possible. They have strict regulations and training procedures in place in order to make certain that these industrial machinery and their repair processes are handled as safe as possible and with respect. It is important that companies follow their rules and steep fines could happen if they are not adhered to.

Mitsubishi: Used Mitsubishi Lift Trucks Pasadena - The small industrial machinery called the forklift is quite versatile able to utilize many attachments which enable it to raise and transport a range of different loads. These kinds of equipment are very useful in factories and within warehouses, and are normally used in dockyards, shipping and receiving, aviation, construction and agricultural businesses. When compared to a regular truck or car, forklifts work on a rear-wheel drive system and this makes driving somewhat strange. As these kinds of equipment lift their loads at the front, the center of gravity is always changing and this can make the forklift unstable. To be able to make sure that packers are given complete orders, the packing operations have been improved. The packers are too busy to be running around the warehouse worried with anything missing and are not worried with whether or not the order is complete. It's a good idea to see if packers have adequate room by observing their activities and making certain that they have an adequate amount of room so that they are in a safe working setting. If packers are bumping into each other or tripping over boxes, dangerous situations could take place. One more good idea is to provide a consistent workflow within the packing area. By making certain that packing operations do not fluctuate between rush hour activity and dead periods, everything would run smoother. If any changes are detected, it may be a great idea to revise your picking process in order to make sure that everything is effectively working. Your operators should be able to provide you with gain input. If you teach material handling and warehouse workers and forklift operators regarding process improvement, you will improve overall effectiveness drastically. Another method is to ask the staff to identify one job they perform and to detail all of the steps involved in performing the job. Then ask for feedback on how this method could be improved. Usually, there are numerous great suggestions the workers would come up with to be able to help enhance overall efficiency and streamline their work. One more great way is to observe the best operators to decipher their process tricks. After that, have those operators teach other workers how to save both time, and effort. If you this, you may be able to significantly improve your effectiveness and discover a real leader among the operators.

Raymond: Used Raymond Double Reach Forklifts Pasadena - Raymond provides excellent attachments and forklifts specifically manufactured for the food processing business. This industry is amongst the busiest industries within our current world's infrastructure. The food processing business utilizes a huge variety of material handling solutions so as to handle the diversity in the food supply chain. Like for example, if you are shipping or receiving raw ingredients or raw materials or preparing to send a shipment out of your distribution center, then you require forklifts that are designed to suit the productivity requirements and needs of a high velocity warehouse environment. For the processing floor end of the spectrum, you will require machines that can be exposed to various harsh environments and is able to be resilient enough to endure caustics, brine and other fluids, while holding up to regular wash downs. Extreme material handling solutions are required for the harshest settings. No other material handling business pays as close attention to the extreme paces and situations you put your lift trucks through more than Raymond. Caustic and acidic brine or fluids can take its toll on your environment. Like for example, meat, poultry and fish could greatly decrease the overall life of your trucks. Additionally, frequent wash downs can also influence and shorten the truck life. The Raymond Extreme Environment Corrosion package is an available choice on numerous models of pallet trucks so as to help extend the life of your forklift. This corrosion package helps to save on maintenance costs and lessen your total cost of ownership. The exceptionally clean manufacturing and distribution environments required by the Pharmaceutical and Medical communities require ideal lift trucks like Raymond's narrow aisle lift trucks and very narrow aisle electric lift trucks. These particular industries have to know they are utilizing efficient and non-polluting machinery whenever possible and Raymond delivers every time.

Clark: Used Clark Diesel Forklifts Pasadena - Diesel Forklifts Versus Electric Forklifts A forklift could function either by internal combustion (IC) motor or by an electric motor. Electric forklifts are best for use indoors and cost less to operate. IC equipment are suitable for outdoor application and are faster to refuel. Electric Forklifts Electric lifts produce no exhaust, that makes them the machinery of choice for indoor applications where air quality is a concern. Electric forklifts are quiet and clean. They are 20% to 40% more expensive to buy compared to IC lifts, but the operating cost of electric models on a per hour basis is a lot lower. The disadvantage is that batteries need 16 hours to charge and cool down, so buying an extra set of batteries is suggested. Electric lifts are not limited to indoor application, but when used outdoors they should be used cautiously. Diesel Forklifts Internal Combustion forklifts have a higher carrying capacity than electric forklifts and are generally used for outdoor applications. If your fleet normally operates on one type of fuel, it might be a good choice to purchase an IC unit that utilizes the same fuel. They can run on propane, diesel or gas. Diesel is the least expensive. IC forklifts have the advantage of being less expensive to operate and easy to refuel; however, their operating cost on a per hour basis is higher. Nearly all IC models cannot be utilized indoors. Other Types of Forklifts Narrow-aisle electric forklifts are recommended for tight spaces within warehouses. They are constructed to pick up loads without having to face the lift towards the stacks. Rough terrain diesel forklifts have large tires for running on difficult surfaces.

Manitou: Used Manitou Gas Forklift Pasadena - Most businesses would turn to the forklift to help them transport specific things from place to place or to carry out certain jobs. Before buying a forklift, this is why it is vital for an individual to know what features to look at. These kinds of machines are a large investment and one should know some things before buying. For example, knowing the kind of work environment, whether it is outside or indoors; and what specific lifting capacity needs you would require would help to make sure that you pick the right equipment to fulfill your requirements. Knowing what features to look for when forklift shopping will enable you to find the best choice to carry out any of the tasks at hand. You could determine what type of budget you require in order to meet all the items on your wish list in order to finish any job at the worksite. On the forklift, take into account what type of motor is required. This particular info can really help an individual determine if they are choosing a good machinery which is going to be up against frequent repairs or one which has a stable power source. Some machinery are notorious for failing at the worst possible time and this is obviously a scenario you must avoid. Whether or not the machinery is new or used is another main consideration to take into account. If the forklift is used, the person must determine the number of hours that are on the motor in order to ensure they are getting a machine that would have plenty of time left on the machinery to be able to finish a fair amount of work. Furthermore, they should take into consideration whether or not they can find any required spare components for the machine. Before deciding on a forklift to purchase the lifting capacity of the machine is another essential factor which needs to be taken into consideration. This is very vital because an individual will have to determine if they can lift the weight they need to finish the task with a particular model. If the machine is unable to lift the requirements then choosing that unit is potentially a great waste of money as it would not physically or safely be able to complete the job at hand.

Taylor: Used Taylor Loaded Container Handler Pasadena - Taylor Machine Works' has a completely reliable series of loaded container handlers. Their strong reputation has expanded with the launch of the TXLC Series Loaded Container Handlers. The TXLC Series loaded handlers offer a lot more stable platform due to anchoring the tilt cylinders to the counter-weight. This location is a lot farther back than units before. Each and every one of the newly made models in the TXLC series provides the addition of TICS or Taylor Integrated Control System. This system is capable of diagnosing and integrating essential system parts. Numerous companies and businesses continue to depend on Taylor products thanks in part to their providing the lowest complete operating cost in the material handling business. With a rated load capacity of 90,000 pounds in the 2nd and 1st tiers, the TXLC-974 also offers 85,000 pounds load capacity in the 3rd and 4th tiers. These units provide a 97 inch center of load. When at 106 inch center of the load, the TXLC-974 capacity is 82,000 pounds in the 1st and 2nd tiers and in the 4th and 3rd tiers it is still rated at 80,000 pounds. Taylor Machine Works' is proud of this new heavy-duty addition to their fast expanding family. The TXTCP Series by Taylor Machine Works' is a complete testament to the company's engineering and design capabilities. This series is made to deal with WTP, ISO and Pin-type containers. Also, they could deal with loaded intermodal trailers. The TXTCP-900 is also well suited to rail car terminals. Currently, the TXTCP-900 is the most versatile equipment within the industry and there are no others which really come close. Furthermore, the TXTCP-900 offers a WTP and an ISO container rated capacity of 80,000 pounds. This model is capable of 3-high stacking at 110 inch center of load, a 2-high stacking pin-type container capacity of 67,200 pounds at one hundred ten inch center of load. It also offers a trailer handling capacity of 90,000 pounds at 110 inch center of load. Taylor has worked vary hard to provide strong and reliable machinery for their clients. These models can work in the most challenging conditions and extreme environments. Take time to find your local Taylor dealer and speak to them regarding what your specific applications are going to be and they will be glad to help you determine what the right unit would be.

Jungheinrich: Used Jungheinrich LP Forklift Pasadena - Forklift trucks are essential pieces of machinery utilized commonly in business, especially in distribution centers, warehouses, storage handling and industrial facilities. A lift truck is made of hundreds of parts, such as the cab, the carriage, the power source, the wheels and the engine. Forklifts normally have various types of attachments as well. The following are a few of the most important parts of a lift truck. Lift Truck Engine - the lift truck is made with a power source at the back of the equipment. Different kinds of forklift truck have various kinds of engine that need varying power sources. Like for instance, a forklift with an IC engine can have any of the following as its source of power: LP gas, CNG gas, diesel or gasoline. Electric motor forklifts receive their power from fuel cells or a battery. Frame of The Truck - the base of the forklift truck and the most important of all the forklift components is the truck frame. This forms the core of the machine. All other parts of a forklift are attached to the base, like the wheels, axles, mast counterweight and overhead guard. Fuel and hydraulic fluid tanks may also be part of the frame assembly. Counterweight Forklift Parts - the counterweight is what allows the equipment to be balanced while lifting heavy loads. This part is made of heavy cast iron and is attached to the rear-end of the lift truck. The counterbalance balances the frame of the truck so as to prevent it from tipping over when a load is being carried or lifted on the front. The heavy lead-acid battery in an electric lift truck provides balance and can function as part of the counterweight. The Cab Area - this area is where the operator sits and drives the equipment. Some lift trucks have a cab area that is open to the air and some have closed cabs. There are really a lot of components located in the cab for operating the forks. The cab has such important parts like the steering wheel, operator controls, seats, pedals, levers and switches. The dashboard has operator readouts.

Doosan: Used Doosan Warehouse Forklifts Pasadena - Forklift Truck Training Operators should undergo training on an industrial-powered lift truck, or forklift in order to be given forklift operator certification. The training program should be specific to the lift truck type and attachments which you will be utilizing on the job site. Training should also reflect the setting in which you would be working. Forklift safety must be a top priority for both the operator trainee and the trainer. General Credentials Before assuming any operator duties, all forklift operators must undergo certification and training. Basic credentials for using a forklift include an age minimum of eighteen years and the physical ability to control and operate the unit safely. Pedestrian Safety The safety of pedestrians should be a main concern of any lift truck driver. Pedestrians near the lift truck are at risk of injury or death from getting hit by the machinery or its additions. Pedestrians always have the right of way, and lift truck drivers should honk their horns when working near pedestrians or at intersections or crosswalks. Weather Conditions Forklift accidents usually occur on loading docks. These places become hazardous if rain leaks in through open dock doors making the floor very slippery. Wet floor conditions create a hazard and drivers should be aware of possible dangers when working in loading dock areas. Certification Certification courses for lift truck operators consist of both classroom instruction and practical training that can be tailored for the specific needs of each work setting. Training must be undertaken on the forklift type and attachments that will be used by the trainee in the workplace. Mishaps On average, there is about 100 deaths attributed to forklift mishaps, while more than 100,000 are injured by lift trucks. Nearly all of these accidents are avoidable with correct operator training and attention to safety.

Terex: Used Terex Container Forklift Pasadena - Terex construction equipment has earned a worldwide reputation for being powerful, dependable and efficient. These equipment are recognized for working well in challenging environments and having the ability to accomplish any job within budget and on time. From site dumpers to off-highway rigid trucks, mobile excavators to backhoe loaders, we have the right products and machinery for you and your crew. Our main goal is to offer our clients with complete satisfaction. For instance, our aim is to impresses and delight you to the point that you would enthusiastically recommend Terex machinery to individuals who are looking to utilize similar equipment. We take pride in providing the correct parts and services and the right machinery and to keep everything working great for numerous years to come. Terex hires a responsive and educated team who is devoted to helping you achieve success. Material Handlers Terex offers a huge array of material handlers that are large enough to deal with your largest challenges and offer a level of uncompromising excellence and superior reliability. These machinery provide the power to move. Terex Fuchs material handlers have enough in reserve to deal with increased operation and sales. In addition, the material handlers bring a level of power to the handling sector. The powerful and dependable hydraulics allow slewing maneuvers and accurate and swift lifting to happen. These actions could be controlled in an accurate way thanks to the smooth interface. Stability remains a constant feature when handling heavy cargo and when deploying extended work radii. These kinds of material handlers are made using a generously sized undercarriage outfitted with top-class steel fabrications and stabilizer cylinders. Timber Handling The tail control linkage provided by Terex offers the winning edge. Maneuverability and speed are the main factors of operations at sawmill and timber yards if they should be done with optimal effectiveness. The mobile Terex Fuchs timber handlers ensure logistical leadership by offering outstanding features. Terex has taken the time to listen to their client's comments through the years. They have applied these suggestions and come up with many innovations ever since their beginning, to satisfy their diverse customer's requirements. Terex wants to make their equipment ergonomically correct and focuses on operator comfort and help ensure high efficiency levels for people who use their equipment. No matter what type of application your company needs, there are a variety of suitable Terex machines available to get the task done.

Haulotte: Used Haulotte Electric Scissor Lifts Pasadena - Electric Scissor Lifts Normally, electric scissor lifts are used on "flat slab" applications. There are various amp, weight and width configurations offered on the market today. The electric scissor lift has become a highly sought after machinery used for a lot of different settings. Because of the low noise and the zero emissions, these machines are the ideal alternative for indoor and enclosed work places. Electric scissor lifts are available in different sizes. There are some larger scale models and also a micro class. The micro class units are extremely compact units that feature amazing maneuverability, compact dimensions and tight turning radiuses. A lot of electric scissor lifts are suitable for internal operation and come outfitted with push out extension decks and non-marking tires. There are lots of different working heights available. Different features available include various deck size options, wide or narrow body styles and platform capacity options. Electric Scissor Lift All operators want to make sure that the industrial machinery they are using keep them both safe and secure. It really doesn't make a difference how long a driver has woked within the industry or how much experience a driver has, it is really crucial to make certain that safety remains the main concern. Although the driver is being hoisted off of the ground leaving them exposed, operators do not have a lot to be concerned about. These equipment are designed to be safe and have safety mechanisms to maintain this. Electric scissor lifts are amongst the most popular lifts which are on the market. Electric safety lifts have been engineered to be able to elevate to any height without putting the operator in danger. They can lift people and materials safely and securely. Usually found in factory settings, at industrial parks, and on construction sites, as well as interior retail spaces, they are a popular item. The strength of the product makes it really trusted and dependable. The design ensures that you are not only being lifted by one piece of metal but by many.

Genie: Used Genie Electric Boom Lifts Pasadena - The aerial work platforms manufactured by Genie are versatile, user-friendly, and effective machines, while providing a cost effective solutions for certain work applications. All Genie products come with a lightweight design, versatility of use, and increased productivity built into them. They also boast a great team of professionals which are available to give assistance and support in an effort to lessening the risk of prolonged down time. Genie's aerial work platforms are engineered to be compact and lightweight, making them perfect for a wide array of jobs from small to large warehouses, schools to small businesses. Genie aerial work platforms are suitable for both small and big job sites and construction jobs, even work on high rise buildings. Genie's goal is to make your business more efficient using economical solutions suitable to your work site's needs. Numerous options, accessories and features are available to make the machines tailored to your requirements. Features on numerous units are flexible and provide what your business requires at a price that really works for you. Additional bonuses are that Genie equipment are transported and moved easily, and they are made to be compact, lightweight, and really easy to maneuver. One person could set up a machine with ease and be ready to work in a very short time. Genie equipment, engineers, and dealers are all devoted to keeping your company up and running, increasing your overall productivity, and providing you with a client satisfaction experience that is considered top-of-the-industry. We are always available to provide support for and answer your questions about Genie machines which you may own already, so never hesitate to let us help you.

Yale: Used Yale Narrow Aisle Forklifts Pasadena - In the North American market, Yale is amongst the largest volume manufacturers of zero emissions electric forklifts around. The business was amongst the very first to apply the energy efficiency of AC motor and control technology. Yale's continued pursuit of improved energy efficiency is improved more by competitive testing. These testing results feature that Yale's 5000 pound electric rider model offers the best energy used per load moved, or energy efficiency, of any kind of forklift within its class within North America. Green Innovations Yale was able to introduce and develop a ground-breaking electronically controlled transmission which could greatly reduce the tire and brake wear for our ICE lift truck customers. With regards to our electric trucks, Yale has implemented a particular system to recapture energy into the lift truck during braking and during the lowering of loads. This energy could then be utilized again. This process really lowers the overall energy consumption of the model. Yale has used many innovative engineering techniques to decrease non-productive energy use throughout the vehicle by means of hydraulic system efficiency, drive train efficiency and weight reduction. There are still pending patents on the drive train efficiency. Green Initiatives Over the past several decades, Yale has gone the extra mile in making their lift trucks to be compatible with all the newest in alternative power technologies. The business has applied clean diesel fuels, LPG option and electric battery units. This practice is being upheld most recently, with Yale being amongst the first to implement working fuel cells in actual applications. Yale has supported numerous greener technologies through engineering teamwork. Furthermore, we have started a new system of field validation testing, and analysis. At the current time, we are investigating in more effective battery chemistries and technologies, so as to increase productivity, reduce overall energy use and decrease toxic material content. Yale is strongly committed to these green initiatives and they are reinforced by the company's participation in developing and setting new industry standards to adopt these greener technologies in a reliable and safe way. Another prime factor in Yale lift truck design is recyclability. Beginning at the design stage, Yale actively selects materials for its lift trucks keeping the recyclability factor in mind. Re-using materials as much as possible and having broken down things to be able to be sent for recycling greatly reduces our footprint and keeps environmental sustainability at the forefront of our business.

Peiner: Used Peiner Tower Cranes Pasadena - In the Salzgitter Group, Peiner Trager GmbH represents steel and technology, a comprehensive delivery program. This particular section specializes in successful development for particular steel and purposes. Since the year 1876, I-shapes are rolled in Peine. The Peine beam, a parallel wide-flange-beam, known all around the world as "Peiner Trager" was developed here, presented, and patented for the very first time during 1914. The company's production program for beams has been permanently improved, optimized and adjusted to the particular needs of our customers ever since. Peiner has proved to be a beneficial and dependable partner. They provide a wide variety of pre-fabrication work up to the finishing and delivery of ready-to-assemble constructions for production unit building requirements, bridge-building and steel structures . Peiner offers the most up to date processes and installations. The promptness and dependability of the company is ready to assist customers and become the competent partner for fabrication and stockholders. The following services give both fabricators and financial investors the best assistance for distinct cost reduction and high competitiveness. These services consist of supply of ready-to-assemble construction units, reduction lead times, reduction of handling and addition of the capacities of steel-fabricators. Steel is a high-quality, attractive quality product that is utilized in lots of sectors. Steel is usually used in the automotive and construction businesses because of its tailor-made product properties and extreme versatility. Steel is an environmentally friendly material and is suitable for recycling. Around 100 tons of scrap can be smelted down into molten steel. The process is completed by a DC electric arc furnace in less than 40 minutes. After the molten steel has been homogenized, it is analytically refined in a downstream ladle furnace method. To be able to form charging material, the second step involves the refined steel being subsequently cast in a 6 strand continuous bloom casting plant. A vacuum plant is accessible for specific requirements, in order to set low sulfur and hydrogen contents. In Salzgitter and Peine, the charging material is then rolled to form sectional items on 2 efficient and modern rolling mills. This is completed by utilizing the universal rolling procedure.

Crown: Used Crown Electric Forklift Pasadena - Forklift Battery Dangers Electric forklifts are the best choice by lots of supply outlets or warehouses that have to transport equipment and heavy products out of and into storage. These battery-powered machinery can run quietly on big batteries and are capable of lifting heavy cargo. Typically, warehouse employees are responsible for recharging the batteries or swapping them out during a shift. Although these batteries have been designed and developed with safety at the forefront, there are still several issues a user must know and things to be avoided when near the batteries. Weight Several forklift batteries can weigh up to 2000 lbs. or 1 ton, depending upon the type. These extreme weights factors will need mechanical assistance to safely charge and change the battery. Approximately 50 percent of all injuries related to lift truck batteries result from improper lifting and moving these heavy pieces of machinery. Sometimes jacks, other forklifts or even specialized carts are used so as to move and transport heavy batteries. The overall success of using these pieces of machine depends on how securely the handler affixes the battery to the cart. Unfortunately, severe injuries could occur because of falling batteries. The industry has strict protocols that describe how and when the forklift battery would be charged. Nearly all companies have extensive rules and regulations describing the safest way to remove the lift truck battery in an efficient and safe manner. Corrosives It is essential to realize that forklift batteries are filled with corrosive liquids which require proper safety measures followed in order to handle them. Two of the most common types of lift truck batteries include sulfuric acid and potassium hydroxide. These are both really corrosive materials which can result in chemical burns to the hands, skin, face and eyes.

Ingersol Rand: Used Ingersol Rand Rough Terrain Forklift Pasadena - Even after the rise and explosion of telehandlers on the material handling industry, rough terrain lift trucks and vertical mast lift trucks could be found lifting and transporting different goods and materials on jobsites all around the world. There have been numerous other traditional lift trucks which lost market share to telehandlers. This happened especially when the challenger broke onto the construction scene. Ever since that time, sales numbers have stabilized. Vertical-mast lift trucks have re-emerged and seem to be becoming more popular again because of their greater production, lower cost and alteration of some telehandler-like features. The straight mast lift truck could complete double the work as a telehandler because of their excellent handling and maneuverability in addition to their better ground speed. Interestingly enough, rental outfits are beginning to charge higher rates on straight-mast units. In the rough-terrain forklift business, rental purchasers have been having a greater influence. Over 50 percent of all vertical-mast lift trucks are presently being sold to a rental yard. These acquisitions are usually driven mostly by utilization, that is a factor closely followed by acquisition price. In the material handling industry, the telehandler has become the darling new machinery. Its popularity has enhanced its advantage in the rental market as well. Their overall expansion has been moderated by their higher price. There is several lift truck users who feel that telehandlers are not practically as useful as opposed to traditional rough-terrain forklifts for loading and unloading repetitive tasks. This means that although competition among telehandler marketers has lowered their prices, many choose the RT forklifts that have been working well for decades. In comparison, the telehandler is ganglier, a little slower to operate and needs a higher level of skill to finish the job. On the upside, they get the reach if they require it. There will continuously be a place within the industry for forklifts however, as there are locations which you will not be able to access with a telehandler. The rough-terrain lift truck is small, compact and could lift a heavier load vertically compared to the telehandler. Essentially, so as to use the right machine for your application, you would need to determine what tasks precisely you will be completing, the type of conditions and setting you would be operating in and what your load capacity is. These factors will help you choose what the best alternatives available are.

Case: Used Case Rough Terrain Forklift Pasadena - Case equipment are amongst the fastest equipment within the industry and provide an ease of operation and zero tail swing. These forklifts are built to handle the most difficult rough terrain environments head-on. The durable engine and rugged powertrain surpass the tractive force necessary to operate on hillsides or in the mud. Minimal chain stress and smooth load control offers easy use of the machine. The harshest of lifting applications roughest off-road material handling applications require a durable and rugged lift truck to perform the task. Case G Series 3 rough-terrain forklifts offer exceptional operation in even the worst settings. There are 2 heavy-duty units to select from, the 586G and the 588G to meet your material handling needs. Comfort and Control - The G-Series by Case provide 3 ideal machinery for working long hours on the job. They provide entry from either side into the operator's compartment, a choice of seats and simple to utilize controls. Load control is one more available feature that provides minimal chain stress and smooth operation. These items provide a reduced maintenance cost. Superior Visibility - The wide channel of the dual mast cylinders and the tapered hood help to provide better operator visibility for safer and more efficient material handling on the job. The low profile design of the Case forklift is compact too and this particular feature adds to the machine's overall stability. Outstanding Maneuverability - Whether you are handling large cargo in narrow or tight spaces and require the muscle of a standard, full-sized lift truck, Case has the best choices for you. The 588G and the 586G both with their 55 degree axle turn angle offer a narrow turning radius. These kinds of machinery offer a maximum width of 2.24m or 88 inches and also have zero tail swing. Impressive Lift Speed - The Case G Series 3 lift trucks have earned a reputation of being among the fastest within the industry. They offer a maximum lift speed of 105 feet or 32m per minute, allowing you to become much more effective during your work day. Ease of Maintenance - Case does service and maintenance like no other company within the industry. Overall efficiency is greatly better with the design of ground-level service access that has been engineered and designed on the Case G Series 3 lift trucks. Like for example, the roller mast design and the self-adjusting wet disc brakes reduce maintenance cost and increase part life.

DP-CLK255
Stock Number: DP-CLK255 GL
Make: CLARK
Model: TMX25
Year: 2017
DP-CLK255
300652
Stock Number: 300652 GL
Make: JLG
Model: 1930ES
Year: 2016
300652
300725
Stock Number: 300725 GL
Make: JLG
Model: 450AJ
Year: 2016
300725
268367
Stock Number: 268367 GL
Make: Terex
Model: CTT 561-20 HD23
Year: 2002
268367
EQC035711
Stock Number: EQC035711 GL
Make: HYUNDAI
Model: 35D-9
Year: 2017
EQC035711
LS13774
Stock Number: LS13774 GL
Make: CAT
Model: NR3000
Year: 2006
LS13774
301581
Stock Number: 301581 GL
Make: Tico
Model: ProSpotter
Year: 2016
301581
ATT131
Stock Number: ATT131 GL
Make: JLG
Model: 1.5 Yard Bucket
Year: 2011
ATT131
600286
Stock Number: 600286 GL
Make: Liebherr
Model: 35K
Year: 1990
600286
LS10105
Stock Number: LS10105 GL
Make: YALE
Model: MPB040-EN24T2748
Year: 2012
LS10105
DP-HYU149
Stock Number: DP-HYU149 GL
Make: HYUNDAI
Model: 25BC-7
Year: 2012
DP-HYU149
EQC003477
Stock Number: EQC003477 GL
Make: MMD
Model: SDG40S-8B1
Year: 2017
EQC003477
EQU008127
Stock Number: EQU008127 GL
Make: Combilift
Model: CL80110DA50
Year: 2008
EQU008127
206214
Stock Number: 206214 GL
Make: CAT
Model: GC40K-STR
Year: 2014
206214
230343
Stock Number: 230343 GL
Make: Terex
Model: CTT 181B-8 TS21
Year: 2008
230343
DP-HYU618
Stock Number: DP-HYU618 GL
Make: HYUNDAI
Model: 25L-7A
Year: 2017
DP-HYU618
621923
Stock Number: 621923 GL
Make: Spydercrane
Model: URW095
Year: 2018
621923
EQU008136
Stock Number: EQU008136 GL
Make: Combilift
Model: C12000
Year: 2008
EQU008136
209058
Stock Number: 209058 GL
Make: LIFTKING
Model: LK12M42
Year: 2015
209058
212579
Stock Number: 212579 GL
Make: JLG
Model: 600AJ
Year: 2014
212579
EQC004602
Stock Number: EQC004602 GL
Make: Magnum
Model: MLT6SM
EQC004602
DP-TOY263
Stock Number: DP-TOY263 GL
Make: TOYOTA
Model: 7FBCU25
Year: 2001
DP-TOY263
EQC010011
Stock Number: EQC010011 GL
Make: JLG
Model: 1055
Year: 2018
EQC010011
EQU016712
Stock Number: EQU016712 GL
Make: KALMAR
Model: DCE160-9
Year: 2014
EQU016712
EQU011315
Stock Number: EQU011315 GL
Make: Tico
Model: ProSpotterDOT19
Year: 2019
EQU011315
267175
Stock Number: 267175 GL
Make: Genie
Model: S65
Year: 2013
267175
EQU003868
Stock Number: EQU003868 GL
Make: Tico
Model: ProSpotter
Year: 2017
EQU003868
EQU016116
Stock Number: EQU016116 GL
Make: HYSTER
Model: H1150HD-CH
Year: 2006
EQU016116
621945
Stock Number: 621945 GL
Make: Potain
Model: IGO T85A
Year: 2018
621945
DP-TOY225
Stock Number: DP-TOY225 GL
Make: TOYOTA
Model: 7FBCU35
Year: 2003
DP-TOY225
LS14564
Stock Number: LS14564 GL
Make: KALMAR
Model: DCF250-12
Year: 2014
LS14564
300619
Stock Number: 300619 GL
Make: Tico
Model: ProSpotter
Year: 2016
300619
EQU003869
Stock Number: EQU003869 GL
Make: Tico
Model: ProSpotter
Year: 2017
EQU003869
622014
Stock Number: 622014 GL
Make: Potain
Model: IGO T85A
Year: 2015
622014
269128
Stock Number: 269128 GL
Make: Terex
Model: CTT 321-16 TS23
Year: 2012
269128
232579
Stock Number: 232579 GL
Make: ADVANCE
Model: SW8000
Year: 2014
232579
230392
Stock Number: 230392 GL
Make: Terex
Model: CTT 231-10 TS23
Year: 2008
230392
DP-TOY171
Stock Number: DP-TOY171 GL
Make: TOYOTA
Model: 8FBCU25
Year: 2012
DP-TOY171
230416
Stock Number: 230416 GL
Make: Terex
Model: CTT 331-16 TS23
Year: 2008
230416
267846
Stock Number: 267846 GL
Make: Liftking
Model: LK12000
Year: 2003
267846