Reach Forklifts
In the majority of distribution centers or warehouse settings, overall space is typically limited. If you could get a machine to utilize in smaller aisles and spaces, the more storage space a company would be able manage. Hence, specialized equipment has been intended for operating in extremely narrow aisles so that efficiency and space could be maximized.
Reach Trucks
The specific reach lift truck has a mast which extends away from the forklifts body. It usually is attached with a scissor mechanism. When the scissor is drawn in or compacted, the forklift becomes a lot narrower that the regular forklift.
Operator Position
Reach trucks are designed so the driver could stand while in operation of the machine. This is a contrast to the typical lift truck where the operator is usually sitting. The standing operation area reduces the amount of room required for the operator compartment, enabling the machinery to achieve an even smaller profile overall.
Space Saving
Aisle-ways can be made as narrow as 7 feet with a reach truck. The majority of regular lift trucks require a minimum aisle space of approximately 11 feet; thus, utilizing a reach truck gives roughly a savings of 5 feet on each and every aisle. When renting a warehouse on a square foot basis, this is a considerable amount of space.
Unique Controls
A reach truck is normally steered utilizing a rotating lever that is located on a platform beside the driver. There is a different lever utilized to control forward and reverse, the mast and for extending the mast. These controls are somewhat different than regular forklift controls.
Load Capacity
The reach truck would normally have a load capacity less than standard forklifts. This is largely due to the machine's narrow design, which can cause a very high center of gravity. When the mast is fully extended and the load is lifted, this is actually true.